WATER FILTERS & PARTS

PURINIZE® DIY WATER BUCKET KIT

$99.95

• DESCRIPTION
• DIRECTIONS
• MAINTENANCE

• Make your own two-bucket gravity water purification & filtration system in case of emergencies with the PURINIZE® DIY WATER BUCKET KIT.
  
  This powerful kit will eliminate/reduce 200+ contaminants including industrial and agricultural chemicals, heavy metals, pharmaceuticals, VOC's, disinfectants, disinfection byproducts, and more, and can be used to purify & filter water from any freshwater source - no pumping, back-logging, harsh purification chemicals, or electricity required. Great for families or groups.

  KIT INCLUDES:
  
  2 - PURINIZE® Water Purifier Drops 8 oz.
  (Enough to purify up to 120 gallons of water)
  1 - 0.2-Micron Ceramic Filter
  1 - Spigot
  
  Does not include drill, drill bits, or buckets.

      

• • WHAT YOU NEED:
    
    1 - PURINIZE® DIY WATER BUCKET KIT
    1 - 1/2" Drill Bit
    1 - 3/4" Drill Bit
    1 - Drill
    2 - 5-Gallon Buckets with Lids
  • DIRECTIONS:
  1. (Bucket 1) Drill a hole in the bottom center of 1 bucket using the 1/2" drill bit. Also, drill a hole in the center of one of the lids using the 1/2" drill bit.
  2. Place Ceramic Filter on the inside of the drilled bucket and attach from the bottom using the rubber gasket and wingnut. Tighten until slightly snug. (DO NOT OVER TIGHTEN!)
  3. (Bucket 2) Drill hole in the side of second bucket several inches above the bottom of the bucket using the 3/4" drill bit. Insert water spigot and attach from inside using the rubber gasket and nut provided. Tighten until slightly snug. (DO NOT OVER TIGHTEN!)
  4. Place lid with a hole drilled into it on top of Bucket 2.
  5. Fill Bucket 1 with water and treat with the proper amount of PURINIZE®. Place Bucket 1 on top of Bucket 2 so that the Ceramic Filter spout fits in the hole of the lid on top of Bucket 2

• As the Ceramic Filter gets clogged, rinse clean after each use. If the Ceramic Filter is rinsed clean but still shows signs of slow drip rate, then you will have to do a slight surface scrub. Gently scrub the outside of the filter using the green side of a sponge. Never use soap or detergents because they may clog the filter. The Ceramic Filter should be replaced every 1,000 gallons. 

  Flow Rate: You should see a drop rate of 30-60 minutes per gallon of water. Because the filter system relies on gravity, the fuller the top bucket is the faster the drip rate will be. You may drill additional holes and install up to 3 total filters for much faster flow rates. This is not required and will only increase the flow rate of the system. 

PURINIZE® Ceramic Replacement Filter

$34.95

• Description
• Features

• Ceramic replacement filter for the PURINIZE® DIY Water Filter Kit.
  
  This filter is composed of highly compressed ceramic with an absolute pore size of 0.2 microns in diameter. It's the filter’s first line of defense as it traps particulates, sediment and other contaminants from entering the 4-Stage Filter in the lower tank for additional filtration.

• • Long-lasting. Replace once every 12 months.
  • Provides up to 1,000 gallons of safe, clean drinking water.
  • Easy to replace and maintain.

PURINIZE PRO-5 4-Stage Replacement Filter

$34.95

• Description
• Specs
• Features

• 4-Stage replacement filter for the of the PURINIZE PRO-5 10L Water Filter.

  This filter has four stages of filtration that trap harmful contaminants and help reduce bad odors, tastes, and other compounds.

• • Stage 1: Activated Carbon
  Carbon has been used since ancient times (1200 BC) to purify water. Activated carbon is “activated” by heat and oxygen to create a high surface area that absorbs a broad range of contaminants frequently found in water.
  • Stage 2: Zeolites
  Zeolites are microporous, aluminosilicate minerals with a unique cage-like structure that makes them useful in many ways, especially in water filters. Their ion-exchange and absorption properties are used to reduce odor and clean heavy metals and other natural compounds, like debris and sediment from water.
  • Stage 3: Silica Sand
  Silica sand is commonly used in water filters because of its highly absorbent qualities to remove granular contaminants, suspended solids and colloids.
  • Stage 4: Ion Exchange Resin
  In water purification, ion exchange resin is used to remove poisonous and heavy metal ions, replacing them with more harmless ions, such as sodium or potassium.
• • Long-lasting
  Replace once every 6 months (or 500 gallons).
  • Convenient
  Easy to insert & replace.
  • No Maintenance Required.

PURINIZE® Replacement Spigot

$13.95

Replacement spigot for the PURINIZE® DIY Water Filter Kit.

Bucket System w/Purinize 8 oz

$99.00 $199.99

ENHANCE YOUR POTABLE WATER Experience the ultimate water treatment system with the Water Bucket Filter System, enhanced by the powerful purification properties of Purinize water puryifying...